Unify OpenScape 4000 User Manual Download Page 24

Page: 24 / 256

Getting to know the OpenScape Desk Phone CP700/700X

Navigator

You can use this control to navigate within lists and execute actions in the selected area.

Establishes a conferences call

Activates a function configured by your administrator

Operation

Functions when key is pressed

Press the

key.

In conversation mode:
• Opens subscriber information

In settings:
• Moves down a level

Press the

key.

In lists and menus:
• Moves one level back

In input fields:
• Deletes character to the left of the cursor

Press the

€

key.

In lists and menus:
• Scrolls down
• Press and hold: Skips to the end of the list/menu

Press the

key.

In lists and menus:
• Scrolls up
• Press and hold: Skips to the start of the list/menu

Press the

key.

Executes an action for the selected entry.

In some cases the

button has no functionality. This happens when no menu option is

highlighted in order to protect you from accidentally triggering the wrong action with the

button. If you accidentally press the

button when nothing is highlighted, no action will be

performed.You have to use either

€

to make your selection first and then confirm

your choice.

Key

Function when key is pressed

Summary of Contents for OpenScape 4000

































































































































































































































































Search results

Summary of Contents for OpenScape 4000

Reviews:

Related manuals for OpenScape 4000

Brands by name

Popular brands

Unify OpenScape 4000, User Manual

Search results

Summary of Contents for OpenScape 4000

Reviews:

Related manuals for OpenScape 4000

Brands by name

Popular brands