Unify OpenScape 4000 User Manual Download Page 203

Page: 203 / 256

Other settings and functions

201

Managing call forwarding

Open the Presence menu.

Open the Forward to menu.

Open the Forwarding controls menu.

Three types of call forwarding are offered in the Forwarding menu:
• Unconditional
• Busy
• No reply (after xs)

€µ

Select the forwarding type.

Here for instance Unconditional.

And open it.

Open the editor (



page 24).

The input field is displayed.

Enter/change the destination phone number and conclude your input by select-
ing the Softkey.

Exit the menu for entering the destination.

Activate call forwarding if appropriate with the Softkey.

Forward all calls

¦_

Forwarding controls

You can check at this point whether a call forwarding type is already acti-
vated.

Unconditional

¦ _

Destination

335

Unconditional

335

¢ _

Summary of Contents for OpenScape 4000

































































































































































































































































Search results

Summary of Contents for OpenScape 4000

Reviews:

Related manuals for OpenScape 4000

Brands by name

Popular brands

Unify OpenScape 4000, User Manual

Search results

Summary of Contents for OpenScape 4000

Reviews:

Related manuals for OpenScape 4000

Brands by name

Popular brands