Unify OpenScape 4000 User Manual Download Page 82

Page: 82 / 256

Making calls

Suggestions for using speakerphone mode:

• Adjust the call volume while speakerphone mode is active.
• The ideal distance between the user and the phone in speakerphone mode is

50 cm.

Answering a call via the headset

Prerequisite:

A headset is connected.

Answering calls via the headset key

The phone rings. The caller is displayed. Only the LED on the

key flashes.

Press the key shown.

if nec.

Adjust the call volume



page 22.

Answering calls automatically via the headset

Press the Function key to activate automatic call answering. The key LED and
the headset key illuminate.

Press the key for the Main menu.

Open using the Softkey.

€

Select the function.

Press the Softkey to activate automatic call answering. The key LED and the
headset key illuminate.

A short acoustic signal is heard on the headset for a call and the connection is
established.

If you want to manually answer calls again, deactivate the automatic answering
function using the "Auto-Headset" key. Both keys are off.

Make sure your headset port is set up properly



page 176.

‹

Incoming call

Thomas Meier

1234954

The administrator has additionally configured a Function key with the "Au-
to-Headset" function (AICS Zip tone) (



page 136).

Auto-Headset

Favourites

Auto-Headset

Summary of Contents for OpenScape 4000

































































































































































































































































Search results

Summary of Contents for OpenScape 4000

Reviews:

Related manuals for OpenScape 4000

Brands by name

Popular brands

Unify OpenScape 4000, User Manual

Search results

Summary of Contents for OpenScape 4000

Reviews:

Related manuals for OpenScape 4000

Brands by name

Popular brands