Unify OpenScape 4000 User Manual Download Page 173

Page: 173 / 256

Privacy/security

171

Dialing emergency numbers

If an emergency number is entered on the phone by the administrator,

Emer-

gency call

appears on the display for selection when you have activated the

lock. You can also enter the emergency number via the dialpad.

Press the Softkey. The saved emergency number is dialed.

Unlocking the phone

The display shows: Phone locked.

Press the Softkey.

Enter the User password and confirm. The phone is unlocked if the password is
correct.

Press the Softkey.

Enter the administrator password if the User password is not known. Confirm
with the Softkey. The phone is unlocked if the password is correct.

Emergency call



The number will be dialed automatically without pressing the

button.

An empty option on the screen will be shown, therefore if you accidentally
press the

button, the call will not be canceled.

Phone locked

Unlock phone

Admin unlock

If the telephone is locked, an emergency number entered by the adminis-
trator can be dialed using the dialpad or the

Emergency call

option. If the

phone is locked, selected dialing keys (see



page 137) cannot be used.

This also applies even if the emergency number is saved on this key.

Summary of Contents for OpenScape 4000

































































































































































































































































Search results

Summary of Contents for OpenScape 4000

Reviews:

Related manuals for OpenScape 4000

Brands by name

Popular brands

Unify OpenScape 4000, User Manual

Search results

Summary of Contents for OpenScape 4000

Reviews:

Related manuals for OpenScape 4000

Brands by name

Popular brands