Unify OpenScape 35 G HFA User Manual Download Page 85

Page: 85 / 127

Phonebooks

Quick search

Settings

Open the menu

Page 19.

Select and confirm to open the company-wide phonebook.

Enter the first letter of the name you are looking for, e.g. "K".

If you do not enter any further characters, all available names with the corre-
sponding initial letter are displayed after a predefined period of time or after
pressing

to confirm.

You can restrict the output by entering the second and other letters.

The

key is used to switch between letters and numbers.

The

b d

keys are used to delete individual characters.

You can control the search individually by entering extended characters.

To select extended characters, first press the

key.

Rule list:

You enter this character by selecting it in the extended characters.

Corporate phonebook

E n t e r t h e n a m e (Abc)

J L5 (Abc)

Kirsch, Erika

Character

Description

Searches for the exact string before the extended character.

Wildcard. This searches for the character entered and all

possible subsequent characters.

p q s7ß(abc)

Summary of Contents for OpenScape 35 G HFA
































































































































Search results

Summary of Contents for OpenScape 35 G HFA

Reviews:

Related manuals for OpenScape 35 G HFA

Brands by name

Popular brands

Unify OpenScape 35 G HFA, User Manual

Search results

Summary of Contents for OpenScape 35 G HFA

Reviews:

Related manuals for OpenScape 35 G HFA

Brands by name

Popular brands