Unify OpenScape 35 G HFA User Manual Download Page 38

Page: 38 / 127

Enhanced phone functions

Using the caller list

Detailed information as well as a sample display entry are provided on

Page 18.

Retrieving the caller list

Prerequisite:

Your administrator has set up a caller list for your telephone.

Open the idle menu

Page 16.

Confirm the option shown

Call List

Press the illuminated key to open the call list.

The latest entry is displayed, see the example on

Page 18.

To view other calls, confirm each subsequent display.

Ending retrieval

Select and confirm the option shown.

Settings

Press the key shown. The LED goes out.

Speaker

Press the key shown. The LED goes out.

Displaying the call time

Prerequisite:

You have retrieved the caller list and the selected call is displayed

Page 18.

Select and confirm the option shown.

Dialing a station number from the caller list

Prerequisite:

You have retrieved the caller list and the selected call is displayed.

Select and confirm the option shown

Removing an entry from the caller list

Prerequisite:

You have retrieved the caller list and the selected call is displayed.

Confirm the option shown.

Caller list?

1. ”Differing display views in a HiPath 4000 environment”

Page 111

Next?

Previous?

Time/date sent?

Call?

2. Pay attention to the notes on voice encryption

Page 63.

The caller is automatically deleted from the caller list when a connection
is finally set up.

Delete?

Summary of Contents for OpenScape 35 G HFA
































































































































Search results

Summary of Contents for OpenScape 35 G HFA

Reviews:

Related manuals for OpenScape 35 G HFA

Brands by name

Popular brands

Unify OpenScape 35 G HFA, User Manual

Search results

Summary of Contents for OpenScape 35 G HFA

Reviews:

Related manuals for OpenScape 35 G HFA

Brands by name

Popular brands