Unify OpenScape 35 G HFA User Manual Download Page 32

Page: 32 / 127

Basic functions

Using callback

You can request a callback if the internal station called is busy or if nobody
answers. This also applies for external calls via ISDN exchanges. This feature
saves you from having to make repeated attempts to reach the user.

You receive a callback:
• When the other party is no longer busy
• When the user who did not answer has conducted another call

Saving a callback

Prerequisite:

You have reached a busy line or no one answers.

Confirm the option shown.

Accepting a callback

Prerequisite:

A callback was saved. Your telephone rings and the following

message appears on the display "Callback: ...“.

Lift the handset.

Speaker

Press the key shown. The LED lights up.

Select and confirm the option shown.

You hear a ring tone

When configured (consult your administrator), all callback requests are
automatically deleted overnight.

Callback?

Answer?

1. Pay attention to the notes on voice encryption

Page 63.

Summary of Contents for OpenScape 35 G HFA
































































































































Search results

Summary of Contents for OpenScape 35 G HFA

Reviews:

Related manuals for OpenScape 35 G HFA

Brands by name

Popular brands

Unify OpenScape 35 G HFA, User Manual

Search results

Summary of Contents for OpenScape 35 G HFA

Reviews:

Related manuals for OpenScape 35 G HFA

Brands by name

Popular brands