Unify OpenScape 35 G HFA User Manual Download Page 73

Page: 73 / 127

More functions/services

Moving the connection to the next telephone

If you want to move your connection from the first "guest telephone" to a second
"guest telephone", log on to the second "guest telephone" in the usual fashion
(see

Page 72).

The message "Log off successful" is output on the first "guest telephone".

The second "guest telephone" is now blocked. You can now use the second
"guest telephone" in the same way as the first one.

Logging off from the "guest telephone"

Enter the code for "Mobile Login (Log off)", (see

Page 124).

The logoff procedure begins.

The "guest telephone" is now available again with its original phone number,
features and functions.

Your old and new telephone are the first telephones at each connection. The
telephones are in idle state.

The following procedure is carried out on the new phone.

Settings

Open the menu

Page 19.

Select and confirm the option shown.

Enter own station number.

Enter code (telephone lock)

Page 67.

(Not necessary if you have not set a code.)

Confirm the option shown.

Fax details and message on answering
machine

If a fax or answering machine is connected to your system and you have
assigned the "Fax details" function to a programmable key

Page 55, the key

lights up when a fax or a message has been received.

Deactivating signaling

Press the illuminated "Fax service" key. The LED goes out.

Program/Service?

Relocate

Complete relocate

If you exchange numbers of different system phones, programmed keys
are replaced with the default assignment.

You can however connect your phone to a different port and then carry out
the procedure.

Summary of Contents for OpenScape 35 G HFA
































































































































Search results

Summary of Contents for OpenScape 35 G HFA

Reviews:

Related manuals for OpenScape 35 G HFA

Brands by name

Popular brands

Unify OpenScape 35 G HFA, User Manual

Search results

Summary of Contents for OpenScape 35 G HFA

Reviews:

Related manuals for OpenScape 35 G HFA

Brands by name

Popular brands