Unify OpenScape 35 G HFA User Manual Download Page 45

Page: 45 / 127

Enhanced phone functions

Assigning a station number (not for U.S.)

If this function has been configured (consult your administrator), you can
selectively assign a specific number (DID number) to your telephone before
making an external call. The assigned number then appears on the called party's
display.

Settings

Open the menu

Page 19.

Select and confirm the option shown.

Enter the DID number you wish to use.

Dial the external number.

Associated dialing/dialing aid

If this function has been configured (consult your administrator), you can use a
dialing aid to dial numbers and set up calls for your telephone.

The operating procedure depends on whether the dialing aid is connected to the

bus

or the

a/b (T/R) port.

You can also use your system telephone as a dialing aid for other telephones.

Dialing aid on the S0 bus

On the PC, select a destination and start dialing.

The speaker on your telephone is switched on. Lift the handset when the other
party answers.

Dialing aid at the a/b (T/R) port

On the PC, select a destination and start dialing.

"Lift the handset" appears on the PC screen.

Lift the handset.

Dialing aid from your telephone for another telephone:

Settings

Open the menu

Page 19.

Select and confirm the option shown.

Enter the internal station number ("Call for:").

Enter the number you wish to dial.

Program/Service?

*41=Temporary MSN?

Program/Service?

*67=Associated dialing?

Summary of Contents for OpenScape 35 G HFA
































































































































Search results

Summary of Contents for OpenScape 35 G HFA

Reviews:

Related manuals for OpenScape 35 G HFA

Brands by name

Popular brands

Unify OpenScape 35 G HFA, User Manual

Search results

Summary of Contents for OpenScape 35 G HFA

Reviews:

Related manuals for OpenScape 35 G HFA

Brands by name

Popular brands