Unify OpenScape 35 G HFA User Manual Download Page 50

Page: 50 / 127

Enhanced phone functions

Conducting a conference

In a conference call, you can talk to as many as four other parties at the same
time. These may be internal or external users.

Call the first party.

Select and confirm the option shown.

Call the second party. Announce the conference.

Select and confirm the option shown.

Conference

Press the key shown.

A tone sounds every 30 seconds to indicate that a conference is in progress

(can be disabled, consult your administrator).

If the second party does not answer

Confirm the option shown.

Adding up to five parties to a conference

Confirm the option shown.

Call the new party. Announce the conference.

Select and confirm the option shown.

Conference

Press the key shown.

You can only add parties to or remove them from a conference if you
initiated the conference.

Start conference?

Conference?

If voice encryption is not activated or not available on a conference party's
phone, the entire conference is not secure. It may be indicated that the call
is not secure

Page 63.

Return to held call?

Add party?

Conference?

Summary of Contents for OpenScape 35 G HFA
































































































































Search results

Summary of Contents for OpenScape 35 G HFA

Reviews:

Related manuals for OpenScape 35 G HFA

Brands by name

Popular brands

Unify OpenScape 35 G HFA, User Manual

Search results

Summary of Contents for OpenScape 35 G HFA

Reviews:

Related manuals for OpenScape 35 G HFA

Brands by name

Popular brands