Unify OpenScape 35 G HFA User Manual Download Page 69

Page: 69 / 127

More functions/services

Using timed reminders

Prerequisite:

You have saved a reminder

Page 68. The saved time arrives.

The phone rings. The appointment time is displayed.

Speaker

Press the key twice.

Lift the handset and replace it again.

Sending a message

You can send short text messages to individual stations or groups of stations
with system telephones.

Creating and sending a message

Open the idle menu

Page 16.

Select and confirm the option shown.

Enter the internal station number of the recipient or group.
Select predefined text (can be changed by the administrator) and confirm.

...

Enter the code directly.

The code is shown on your display with the corresponding message.

Select and confirm the option shown.

Text entry (up to 24 characters)

Page 16.

Confirm the option shown.

Displaying and deleting messages you have sent

Prerequisite:

The recipient has not yet accepted a sent message.

Open the idle menu

Page 16.

Select and confirm the option shown.

Confirm the option shown.

The text message is displayed.
Select and confirm the option shown.

The message is deleted.

Reminder at 1200

If you do not answer the timed reminder, it is repeated five times and then
deleted.

Send message?

0=Please call back?

Enter message text?

Send?

Transmitted text messages are saved as callback requests on system
telephones with no display and on ISDN, pulse or tone dialing telephones.

View sent message?

Message sent?

Delete?

Summary of Contents for OpenScape 35 G HFA
































































































































Search results

Summary of Contents for OpenScape 35 G HFA

Reviews:

Related manuals for OpenScape 35 G HFA

Brands by name

Popular brands

Unify OpenScape 35 G HFA, User Manual

Search results

Summary of Contents for OpenScape 35 G HFA

Reviews:

Related manuals for OpenScape 35 G HFA

Brands by name

Popular brands