Unify OpenScape 35 G HFA User Manual Download Page 27

Page: 27 / 127

Basic functions

Calling a second party (consultation)

You can call a second party while a call is in progress. The first party is placed
on hold.

Confirm the option shown.

Call the second party

Return to the first party, the second party does not answer:

Confirm the option shown.

End the consultation:

Select and confirm the option shown.

Switching to the held party (alternating)

Select and confirm the option shown

Combining the call parties in a three-party conference

Select and confirm the option shown.

Conference

Press the key shown.

Leaving a conference

Select and confirm the option shown.

Transferring a call

If the person you are speaking to wants to speak to another colleague of yours,
you can transfer the call to that colleague.

Confirm the option shown.

Enter the number of the party to whom you want to transfer the call.

[

Announce the call, if necessary.

Transfer

Press the key shown. The person you were speaking with is now connected to
the desired party.

Replace the handset.

Select and confirm the option shown

Consultation?

1. Pay attention to the notes on voice encryption

Page 63.

Return to held call?

Quit and return?

Toggle/Connect?

Conference?

If voice encryption is not activated or not available on a conference party's
phone, the entire conference is not secure. It may be indicated that the call
is not secure. For more information on conferences, see

Page 50.

Leave conference?

Consultation?

Transfer?

2. ”Differing display views in a HiPath 4000 environment”

Page 111

Summary of Contents for OpenScape 35 G HFA
































































































































Search results

Summary of Contents for OpenScape 35 G HFA

Reviews:

Related manuals for OpenScape 35 G HFA

Brands by name

Popular brands

Unify OpenScape 35 G HFA, User Manual

Search results

Summary of Contents for OpenScape 35 G HFA

Reviews:

Related manuals for OpenScape 35 G HFA

Brands by name

Popular brands