Unify OpenScape 35 G HFA User Manual Download Page 116

Page: 116 / 127

116

Fixing problems

Contact partner in case of problems

Consult your administrator if a fault persists for more than five minutes, for
example.

Troubleshooting

Pressed key does not respond:

Check if the key is stuck.

Telephone does not ring:

Check whether the "Do not disturb" function is activated on your telephone
(

Page 64). If so, deactivate it.

You cannot dial an external number:

Check whether your telephone is locked.

If the phone is locked, enter your PIN to unlock it

Page 66.

To correct any other problems:

First consult your administrator. If the problem still cannot be resolved, the
administrator has to contact Customer Service.

Care and cleaning instructions

• Never spray the phone with liquids as the penetrating fluids can lead to

malfunctions or may damage the device.

• Clean the phone with a soft and slightly damp cloth.
• Do not use substances such as alcohol, chemicals, household cleaners or

solvents, as these substances can lead to surface damage or cause the
coating to peel.

Labeling keys

The following options are available for labeling keys of the
OpenScape Desk Phone IP 35 G with the functions or numbers assigned to
them:

Labeling
• By hand:

Labeling strips are supplied with your OpenScape Desk Phone IP 35 G. Note
the function or name in the white field on the strip and insert the strip on your
OpenScape Desk Phone IP 35 G.

• With a computer via the Internet:

You can find the "online labeling tool" together with the user interface at

http://wiki.unify/index.php/Key_Labelling_Tool

• Select the appropriate key labeling tool in your language. You can use the tool

online via the browser or you can download it for local use.

Summary of Contents for OpenScape 35 G HFA
































































































































Search results

Summary of Contents for OpenScape 35 G HFA

Reviews:

Related manuals for OpenScape 35 G HFA

Brands by name

Popular brands

Unify OpenScape 35 G HFA, User Manual

Search results

Summary of Contents for OpenScape 35 G HFA

Reviews:

Related manuals for OpenScape 35 G HFA

Brands by name

Popular brands