Unify OpenScape 35 G HFA User Manual Download Page 60

Page: 60 / 127

Displaying and assigning call charges

Displaying call charges (not for U.S.)

For the current call:

Call charges are shown by default on the display when a call ends.

If you want to display call charges as they occur during a chargeable call, your
administrator must request this option from the network operator.

Call charge display must be requested from the network operator and configured
by the relevant administrator.

Depending on the setting, call charges are displayed during or after a call.

Depending on the network operator, free external calls are also displayed.

The message "Free of Charge" appears on the screen either before or during
the call.

If the cost indication facility has not been installed, the display will show the
dialed number and/or the duration of the telephone call.

For all calls and for the last call

Connection charges for the last chargeable call made are displayed first.

After five seconds, the accumulated connection charge (total) is displayed.

Settings

Open the menu

Page 19.

Select and confirm the option shown.

Select and confirm the option shown

Displaying call charges for another
telephone (not for U.S.)

If configured (consult your administrator), you can also display and print
information on chargeable calls for other phones (such as a pay phone).

Prerequisite:

You have programmed the function "Show call charges" on a key

Page 55.

The LED lights up to indicate that you have conducted a chargeable call since
the last time you viewed the charges.

Press the "Call Charges" key. Chargeable calls are displayed.

Press to display further chargeable calls.

Select and confirm the option shown.

If a call is forwarded, call charges are assigned to the destination of the
call transfer operation.

Program/Service?

*65=Show call charges?

1. ”Differing display views in a HiPath 4000 environment”

Page 111

Delete

Summary of Contents for OpenScape 35 G HFA
































































































































Search results

Summary of Contents for OpenScape 35 G HFA

Reviews:

Related manuals for OpenScape 35 G HFA

Brands by name

Popular brands

Unify OpenScape 35 G HFA, User Manual

Search results

Summary of Contents for OpenScape 35 G HFA

Reviews:

Related manuals for OpenScape 35 G HFA

Brands by name

Popular brands