Ulvac MS120A, Instruction Manual

Page: 32 / 69

18
YO20-0938-DI-001-00
Table 4: List of standard accessories
Product name Specifications Q’ty Remarks
Power connector
CE connector (DDK)
/JL04V connector (JAE)
1
CE05-6A22-22SD-D-BSS
/JL04V-6A22-22SE-EB-R
Waterproof cable clamp
CE connector (DDK)
/JL04V connector (JAE)
1
CE3057-12A-1-D
/JL04-2022CK(14)-R
Signal connector
Ｄ -sub 15pin
1 With a clamp hood
Quick manual
Japanese version, English
version
1
－
Power connector guard
－
1
－
Nut 1/4 1 VUW-6.35N
Front ring 1/4 1 VUW-6.35S
Back ring 1/4 1 VUW-6.35R
Dedicated silencer For MS 1
Silencer + Check valve + Elbow
piping assembly with drain valve
Outer ring For KF40 1 MCK-2040-OU
Pressure-resistant clamp For KF40 1 PJ0494-NW40
3.3 Transfer
Do not use the casters as a transportation device or a means of
equipment support.
Although this pump is equipped with casters, do not use them as a transportation
device or a means of equipment support.
Do not incline this pump by 10 or more.
Otherwise, this pump may topple, causing injury or damage.
For transport, use cargo-handling equipment (e.g., a mobile crane) or a
pallet truck.
The weight of machine is as follows:
MS120A: 139 kg
To transport this pump, a load higher than the safety standards is required.
Therefore, manually transporting it may cause lower back pain or injury.
Wear safety shoes during transportation
Be sure to wear safety shoes before transferring this pump.