45
2
3
Lift separate sections of ridge body on to trestles. Slide twin cleats
into position.
1
4
5
In the pre-prepped holes, use the fixings provided to fix the
cleats.
Now carefully lift and turn the ‘L’ shaped ridge on to its back. Using
a socket spanner secure the plate on one section of the ridge to
the ridge with the hub attached.
Temporary support/prop the ‘L’ shaped ridge. Offer up the hip
bars. Secure using steps 12-15 in the main installation guide. Build
remainder of the roof as section 4.
Now, as per main guide, seal around each glazing bar top cap
where it meets the inner wall of the ‘soft touch’ weathering shield.
Take the length of PVCu ridge top cap assemblies, seal the two
ends to be joined. Mark and drill for final rivet positions using a
5mm drill bit. Apply plastic rivets. Offer the whole assembly into
position, trimming may be required - see over page. The trimming
should be in the form of removing a strip across the whole width
or as shown above, notching around each bar. Secure ridge into
position with ‘T’ bolts as shown in section 4.
6
Now fit the internal radius end capping using the threaded plastic
rose (trimming may be required - see over page).
L SHAPE RIDGES -
FULL RIDGE TO FULL RIDGE
SECTION 22
Summary of Contents for Classic roof
Page 1: ...V18 January 2021 CLASSIC ROOF INSTALLATION GUIDE...
Page 52: ......
