Page 93
FlexJet Head Assembly
T47541109 Rev. J
TECHNICAL
PUBLICATIONS
This Document Supports Assembly 47541109 Rev. F
Procedure
1.
Use pliers to carefully remove the flaired portion of the Manifold
Tubing from the fitting on the bottom of the Manifold Assembly.
Refer to the following diagram.
Fittings for
Manifold Tubings
2.
Use pliers to carefully remove the Manifold Tubing from the Vacuum
Cap (top portion of spindle).
3.
Refer to the following table to cut the tubing to the appropriate length
for the spindle. Make sure to cut it squarely.
Tubing Length
(Inches)
Spindle Location
Valve Number
2.9
1
1PL
2.7
2
2PL
2.5
3
3PL
2.5
4
4PL
2.5
5
5PL
2.6
6
6PL
2.7
7
7PL
