Page 41
FlexJet Head Assembly
T47541109 Rev. J
TECHNICAL
PUBLICATIONS
This Document Supports Assembly 47541109 Rev. F
Lower a Spindle
1.
Select
Machine Status > Diagnostics > Discrete I/O > Heads
The Discrete I/O - The Head Subsystem window displays.
2.
Select the correct
Head #
(number).
3.
Select the
Tool #
option button for the spindle to be adjusted.
4.
Select
SPINDLE_CLUTCH
in the
Select Outputs
field.
5.
Select
Set Outputs
to engage the clutch.
6.
Select
Yes
when the Discrete I/O message box displays.
Use extreme caution when driving the Z-Axis down until the nozzle tip is
at board height. Jarring, bumping, or mishandling may cause damage
to the head assembly.
7.
Select
Tool # 1
.
Tool # 1 must be selected to set the STOP BRAKE and STOP CLUTCH
for any of the 7 spindles.
8.
Drive down the selected spindle using the following procedure.
a.
Select
STOP_BRAKE
and
STOP_CLUTCH
in the
Select
Outputs
field.
