Document No: LT0082
F08 Installation & Programming Manual
FIP Installation
2.12.3 “ISOLATE”
RELAY
(a)
Normally
de-energised.
(b)
The Isolate Relay will energise on Isolation of any zone mapped to "MASTER
ALARM" or the supervised Ancillary Output. (ie. COM switches from NC to
NO).
2.12.4 “ALARM”
RELAY
(a)
Normally
de-energised.
(b)
The Alarm Relay will energise on an Alarm condition on any non-isolated
zone that is mapped to "MASTER ALARM". (i.e. COM switches from NC to
NO).
-
Two sets of alarm contacts are provided, labelled "ALARM A" and
"ALARM B".
Normally "ALARM A" is used for brigade signalling and "ALARM B" is
used for Door Holders or other alarm functions.
NOTES:
(a)
Some brigade interfaces r24 VDC and 0 VDC, use "+VBF" and "0V"
terminals.
(b)
Refer to instructions supplied with the Brigade interfacing units for connection
details.
Issue 3.04
24 March 2006
Page 2-31
Summary of Contents for F08
Page 48: ......
