turck TBIP-L...-FDIO1-2IOL Series TBIP-L4-FDIO1-2IOL, Instructions For Use Manual

Page: 11 / 165

3
2018/02
TBIP-L…-FD
IO1-2
IOL- Safe I/
O chann
e
ls
7 Commissioning 43
7.1 Initial Commissioning 43
7.1.1 Mounting and Electrical Installation 43
7.1.2 Setting the IP Address 43
7.1.3 Configuring in Turck Safety Configurator 44
7.1.4 Operation of the Device at the PLC 44
8 Configuring with Turck Safety Configurator and Rockwell Studio 5000 45
8.0.1 Downloading the Software 45
8.0.2 Installing the Software 45
8.0.3 Licensing the Software 45
8.0.4 Starting the Software 45
8.0.5 Setting up a New Configuration 46
8.0.6 Adapting the Monitor Settings 46
8.0.7 Setting up a Standard Configuration 49
8.0.8 Checking the Configuration 51
8.0.9 Loading the Configuration into the Safety Module. 51
8.0.10 Customizing the Configuration 54
8.0.11 Application Example 58
8.0.12 Basic Information 67
8.0.13 Used Hardware 67
8.0.14 Used Software 67
8.0.15 RSLinx – Searching the Network for Devices 67
8.0.16 Creating a New Project 68
8.0.17 Configuring the Project in RSLogix Designer 70
9 Operating 85
9.1 LED Displays 85
9.1.1 Error LED (ERR) 87
9.1.2 BUS LED 87
9.1.3 Channel-LEDs 87
9.2 Status and Control Word 89
9.2.1 Status Word 89
9.2.2 Control Word 89
9.2.3 Module Status 90
9.3 Process Input Data 91
9.3.1 Overview - Complete Module 91
9.3.2 Process Input Data - Safe I/O Channels 92
9.3.3 Process Input Data - Universal Standard I/O Channels 96
9.3.4 Process Input Data – IO-Link Master Channels 97
9.4 Process Output Data 98
9.4.1 Overview - Complete Module 98
9.4.2 Process Output Data - Safe I/O Channels 99
9.4.3 Process Input Data - Universal Standard I/O Channels 101
9.4.4 Process Output Data – IO-Link Master Channels 101
9.5 Reset Device to Factory Settings 101