turck TBIP-L...-FDIO1-2IOL Series TBIP-L4-FDIO1-2IOL, Instructions For Use Manual

Page: 18 / 165

For Your Safety
Hans Turck GmbH & Co. KG | T +49 208 4952-0 | F +49 208 4952-264 | more@turck.com | www.turck.com 10
 For the release of safety circuits in accordance with EN/IEC 60204-1, EN ISO/ISO 13850 only use
the output circuits of connectors C2, C3, C4, C5 and C7,
 The red connectors C0 to C3 must only be used for connecting sensors and actuators in safety-
related applications.
2.4 Residual Risks (EN ISO/ISO 12100-1)
The wiring proposals described in the following have been tested under operational conditions
with the greatest care. Together with the connected periphery of safety related equipment and
switching devices they fulfill relevant standards.
Residual risks remain, if
1 the proposed wiring concept is changed and connected safety related devices or protective
devices are possibly not or insufficiently included in the safety circuit.
2 the operator does not observe the relevant safety regulations specified for the operation, adjust-
ment and maintenance of the machine.

Here, the inspection and maintenance intervals for the machine should be strictly observed.
Failure to follow these instructions can result in serious injury or equipment damage.
2.5 Proper and Safe Operation
Appropriate transport, storage, deployment and mounting as well as careful operating and thor-
ough maintenance guarantee the trouble-free and safe operation of these devices.
2.6 Warranty and Liability
Any warranty and liability is excluded for
 improper application or not intended use of the product
 non-observance of the user manual
 mounting, installation, configuration or commissioning by unqualified persons.