![background image](http://html1.mh-extra.com/html/turck/tbip-l-fdio1-2iol-series-tbip-l4-fdio1-2iol/tbip-l-fdio1-2iol-series-tbip-l4-fdio1-2iol_instructions-for-use-manual_1181729069.webp)
61
2018/02
TBPN-L1
-FDIO1-2IOL- Saf
e
I/O
Switch-on Unsafe Channels Permanently (1. and 2. OSSD)
The unsafe channels at C4 - C7 of the device can be safe switched off via the internal safety outputs
FSO0 and FSO1. If they have to be switched on permanently, then FSO0 and FSO1 need a permanent
switch-on condition (TRUE). The programming is done in the 1. and 2. OSSD.
Delete the element "CIP Safety Input" in both OSSDs (1. and 2. OSSD) and replace it by a TRUE-
element from the device library.
Both internal outputs are permanently active.
Fig. 37: Permanent activation of FSO0 and FSO1.
Summary of Contents for TBIP-L...-FDIO1-2IOL Series TBIP-L4-FDIO1-2IOL
Page 1: ...Your Global Automation Partner TBIP L FDIO1 2IOL Safety Block I O Module Instructions for Use...
Page 2: ...2 Hans Turck GmbH Co KG T 49 208 4952 0 F 49 208 4952 264 more turck com www turck com...
Page 118: ...Hans Turck GmbH Co KG T 49 208 4952 0 F 49 208 4952 264 more turck com www turck com 2...