67
2018/02
TBPN-L1
-FDIO1-2IOL- Saf
e
I/O
8.2
Configuring the device at CIP Safety (Rockwell Studio 5000)
8.2.1
Basic Information
The TBIP-Lx-FDIO1-2IOL has two IP addresses. One IP address (in the example: 192.168.1.110)
addresses the safety side (left side) of the device, the second IP address (in the example:
192.168.1.111) addresses the non-safety (right side) of the device.
The TBIP-Lx-FDIO1-2IOL therefore has to be configured in the following two steps in the configura-
tion software of the safe Ethernet/IP™ PLC.
1
Generic EtherNet/IP
Safety
Module: Module for the
safety side
.
2
Generic EtherNet/IP Module: Module for the
non-safety
side.
8.2.2
Used Hardware
TBIP-L5-FDIO1-2IOL
Allen-Bradley Controller: Compact Logix 1769-L30ERMS/A LOGIX5370
8.2.3
Used Software
RSLinx (Rockwell Automation)
Studio 5000 (Rockwell Automation)
8.2.4
RSLinx – Searching the Network for Devices
Scan the network with RSLinx using the "RSWho"-function.
The device responds with two IP addresses.
One IP address (in the example: 192.168.1.110) addresses the safety side (left side) of the device,
the second IP address (in the example: 192.168.1.111) addresses the non-safety (right side) of the
device.
Fig. 42: RSLinx – two IP addresses per device
Summary of Contents for TBIP-L...-FDIO1-2IOL Series TBIP-L4-FDIO1-2IOL
Page 1: ...Your Global Automation Partner TBIP L FDIO1 2IOL Safety Block I O Module Instructions for Use...
Page 2: ...2 Hans Turck GmbH Co KG T 49 208 4952 0 F 49 208 4952 264 more turck com www turck com...
Page 118: ...Hans Turck GmbH Co KG T 49 208 4952 0 F 49 208 4952 264 more turck com www turck com 2...
