Commissioning
Connecting the device to a Modbus master
40
Hans Turck GmbH & Co. KG | T +49 208 4952-0 | F +49 208 4952-264 | [email protected] | www.turck.com
Defining channel 1 (output data)
Double-click the Modbus TCP Slave.
Select in the tab
Modbus Slave Channel
Ò
Add channel
.
Enter the following values:
n
Name
of channel
n
Access type
: Write multiple registers
n
Offset
: 0x0800
n
Length
: 64 registers (128 bytes)
Confirm with
OK
.
Fig. 39: Setting WRITE registers
Changing channel addresses
Double-click the Modbus TCP slave.
Click the
Modbus TCPSlave I/O Mapping
tab.
Enter the address in the corresponding table column.
Fig. 40: Changing channel addresses