turck TBEN-L4-4RFID-8DXP, Instructions For Use Manual, Page: 126 / 242

Setting
RFID channels – overview of commands
126
Hans Turck GmbH & Co. KG | T +49 208 4952-0 | F +49 208 4952-264 | more@turck.com | www.turck.com
8.8.12 Command: HF read/write head tuning
NOTE
The command is only available for the TNLR-… and TNSLR-… HF read/write heads.
The Read/write head tuning command enables HF read/write heads to be tuned automatically
to their ambient conditions. The tuning values are saved until the next voltage reset in the
read/write head.
HF read/write head tuning is carried out automatically by default after each voltage reset.
Request
Loop counter See description of the output data, [
}
99]
Command code 0x0080 (hex.), 128 (dec.)
Read/write head address See description of the output data, [ } 99]
Length UID/EPC Not required
Start address Not required
Length Not required
Command timeout See description of the output data, [
}
99]
Write fragment no. 0
Read fragment no. See description of the output data, [ } 99]
Write data Not required
Response
Loop counter See description of the input data, [ } 93]
Response code 0x0080 (hex.), 128 (dec.)
Length 2
Error code See description of the input data, [ } 93]
Tag within the
detection range See description of the input data, [ } 93]
Data (bytes) available See description of the input data, [ } 93]
Tag counter See description of the input data, [
}
93]
Write fragment no. 0
Read fragment no. See description of the input data, [ } 93]
Read data, Byte 0 Tuning value:
TNLR-…: 0x00…0x0F
TNSLR-…: 0x00…0x1F
Read data, Byte 1 Received voltage value (0x00…0xFF)