manualshive.com logo in svg

turck TBEN-L4-4RFID-8DXP, Instructions For Use Manual, Page: 154 / 242

Share
Download
turck TBEN-L4-4RFID-8DXP Instructions For Use Manual Download Page 154

Setting

Setting RFID interfaces via the web server

154

Hans Turck GmbH & Co. KG | T +49 208 4952-0 | F +49 208 4952-264 | [email protected] | www.turck.com

8.9

Setting RFID interfaces via the web server

NOTE

The web server always displays all setting options. All values are displayed as
decimal numbers.

The devices can be set and commands can be sent to the devices via the integrated web server.
To be able to open the web server with a PC, the device and the PC must be in the same IP net-
work.

8.9.1

Opening a web server

The web server can be opened via a web browser or via the Turck Service Tool. The procedure
for accessing the web server via the Turck Service Tool is described in the section "Setting the IP
address".

In the delivery state the device has the IP address 192.168.1.254. To open the web server via a
web browser, enter 

http://192.168.1.254

 in the address bar of the web browser.

The start page shows status information and network settings.

Fig. 75: Example: Web server – start page

Summary of Contents for TBEN-L4-4RFID-8DXP



















































































































































































































































Reviews:

No comments