turck TBEN-L4-4RFID-8DXP, Instructions For Use Manual, Page: 146 / 242

Setting
RFID channels – overview of commands
146
Hans Turck GmbH & Co. KG | T +49 208 4952-0 | F +49 208 4952-264 | more@turck.com | www.turck.com
8.8.23 Command: Kill UHF tag
NOTE
The command is only available for UHF applications.
NOTE
The command code for fast processing with the loop counter is 0x2200 (hex.) or
8704 (dec.).
The Kill UHF tag command makes the tag memory unusable. After a Kill command, the tag can
neither be read nor written. A Kill command cannot be undone.
Request
Loop counter See description of the output data, [ } 99]
Command code 0x0200 (hex.), 512 (dec.)
Read/write head address See description of the output data, [ } 99]
Length UID/EPC Enter UID or EPC size in bytes if a particular tag is to be
deleted. The UID or EPC must be defined in the write data.
(start byte: 0). The function of the length of the UID/EPC
depends on the command used.
0: No entry of a UID/EPC for executing the command. Only
one tag can be located in the detection range of the read/
write head.
> 0: EPC length of the tag to be deleted if an EPC is present
in the write data.
-1: NEXT mode: A tag is always only deleted if the UID/EPC is
different to the UID/EPC of the last read or written tag.
Start address Not required
Length 1 Byte
Command timeout See description of the output data, [
}
99]
Write fragment no. 0
Read fragment no. See description of the output data, [ } 99]
Write data, Byte 0...3 Password: ARRAY [0…3] OF BYTE
Write data, Byte 4...127 Not required
Response
Loop counter See description of the input data, [ } 93]
Response code 0x0200 (hex.), 512 (dec.)
Length Not required
Error code See description of the input data, [ } 93]
Tag within the
detection range See description of the input data, [
}
93]
Data (bytes) available See description of the input data, [
}
93]
Tag counter See description of the input data, [ } 93]
Write fragment no. 0
Read fragment no. See description of the input data, [
}
93]
Read data Not required