turck TBEN-L4-4RFID-8DXP, Instructions For Use Manual, Page: 191 / 242

V02.00 | 2020/08
191
„
Execute Idle command (0x0000). The Idle command does not end Continuous mode.
„
To pass on data from the FIFO memory of the interface to the controller, execute the Get
data from buffer (0x0011) command. The address of the read/write head used is also
transferred in addition to the read data. The length of the available data (BYFI) in the FIFO
memory is displayed in the input data at
Data (bytes) . The length of the data must be
consistent. Example: If UID, reserved byte and read/write head address are written to the
FIFO memory for each tag, at least 10 bytes of data must be read from the buffer.
NOTE
Data in the FIFO memory is not overwritten until it was transferred to the controller.
New read operations are appended in the FIFO memory of the interface.
„
To end Continuous mode, execute the End Continuous mode command (0x0012).
or
„
To end Continuous mode and clear the FIFO memory of the interface, send the Reset
command (0x0800).
NOTE
The data must be passed on regularly from the device to the parent level. No other
data can be stored if the 16 KByte ring memory is full. The device outputs an error
message.
User data areas of HF tags
Chip type User data area Access Bytes per block
First block Last block Total memory
[Byte]
NXP SL2 SLI 0x00 0x1B 112 Read/write 4
NXP SL2 SLI-S 0x00 0x27 160 Read/write 4
NXP SL2 SLI-L 0x00 0x07 32 Read/write 4
Fujitsu MB89R118
Fujitsu
MB89R118B 0x00 0xF9 2000 Read/write 8
Fujitsu MB89R112 0x00 0xFF 8192 Read/write 32
TI Tag-it HFI Plus 0x00 0x3F 256 Read/write 4
TI Tag-it HFI 0x00 0x07 32 Read/write 4
infineon
SRF55V02P 0x00 0x37 224 Read/write 4
infineon
SRF55V10P 0x00 0xF7 992 Read/write 4
EM4233 0x00 0x33 208 Read/write 4
EM4233 SLIC 0x00 0x1F 128 Read/write 4