V02.00 | 2020/08
223
9.17
Using extended diagnostics – time measurement for commissioning an
application
The time of the transmission from the tag to the interface is taken as the time measurement.
The data transmission to a controller is not included.
If a particular tag is selected in the
HF: Select tag type parameter
, the time measurement for
the write command is already started with its activation. The time measurement is carried out
irrespective of whether a tag is present in the detection range. The time measurement function
is available for read/write heads from firmware version 1.91.
The following values can be displayed in the web server or in the DTM for extended diagnostics
and for system tests. Actual as well as minimum and maximum values are available.
n
Time in which the
Tag present
bit is set
n
Duration of an Inventory command
n
Duration of a Read command
n
Duration of a Write command
n
Cycle time of HF bus mode
n
Cycle time of HF Continuous bus mode