turck TBEN-L4-4RFID-8DXP, Instructions For Use Manual, Page: 147 / 242

V02.00 | 2020/08
147
8.8.24 Command: Restore UHF read/write head settings
NOTE
The command is only available for UHF applications.
The Restore settings UHF read/write head command restores the parameters of a connected
UHF read/write head from a backup (e.g. after a device swap). Type and firmware version must
be identical for both read/write heads. To execute the command, a backup must be created
beforehand via the
Backup settings UHF read/write head command.
Request
Loop counter See description of the output data, [
}
99]
Command code 0x1000 (hex.), 4096 (dec.)
Read/write head address See description of the output data, [ } 99]
Length UID/EPC Not required
Start address Not required
Length Not required
Command timeout See description of the output data, [
}
99]
Write fragment no. 0
Read fragment no. See description of the output data, [ } 99]
Write data Not required
Response
Loop counter See description of the input data, [ } 93]
Response code 0x1000 (hex.), 4096 (dec.)
Length Not required
Error code See description of the input data, [ } 93]
Tag within the
detection range See description of the input data, [ } 93]
Data (bytes) available See description of the input data, [ } 93]
Tag counter See description of the input data, [
}
93]
Write fragment no. 0
Read fragment no. See description of the input data, [ } 93]
Read data Not required