turck TBEN-L4-4RFID-8DXP, Instructions For Use Manual, Page: 118 / 242

Setting
RFID channels – overview of commands
118
Hans Turck GmbH & Co. KG | T +49 208 4952-0 | F +49 208 4952-264 | more@turck.com | www.turck.com
Request
Loop counter See description of the output data, [ } 99]
Command code 0x0010 (hex.), 16 (dec.)
Read/write head address See description of the output data, [ } 99]
Length UID/EPC Not required
Start address UHF Inventory
1: Grouping of the EPCs active
0: Grouping of the EPCs inactive
>1: Not defined
HF Bus Mode
1: Grouping of the UIDs active
0: Grouping of the UIDs inactive
>1: Not defined
Length Not required
Command timeout Not required
Write fragment no. 0
Read fragment no. See description of the output data, [ } 99]
Write data Not required
Response
Loop counter See description of the input data, [ } 93]
Response code 0x0010 (hex.), 16 (dec.)
Length 0
Error code See description of the input data, [ } 93]
Tag within the
detection range See description of the input data, [ } 93]
Data (bytes) available Increases during command execution
Tag counter Increases with each read or written UID/EPC
Write fragment no. 0
Read fragment no. See description of the input data, [ } 93]
Read data See description of the input data, [
}
93]