TTC T-BERD 107A, Reference Manual

Page: 20 / 261

SECTION 2
2-5
INSTRUMENT CHECKOUT
AND MAINTENANCE
2.5 INSTRUMENT SELF-TEST/
CHECKOUT
Perform the following checkout procedure to
verify the operation of the T-BERD 107A. Perform
the option checkout procedure(s) for each installed
option and skip the option checkout procedure(s) for
the option(s) not installed.
Instrument Checkout Basic Setup
1. Open the T-BERD 107A cover
Release the latch on the right side of the
instrument and open the cover to its full
extension.
2. Connect AC power to the T-BERD 107A
Insert the T-BERD 107A AC power adapter
into the AC ADAPTER connector on the top
panel of the T-BERD 107A and plug the
other end of the cable into an AC power
source.
3. POWER switch
Press this switch on the lid panel to apply
power to the T-BERD 107A. When the in-
strument is powered up, an automatic self-
test is initiated that performs the following
functions.
•
Momentarily illuminates all LEDs.
•
Illuminates the Charging LED.