TTC T-BERD 107A, Reference Manual, Page: 173 / 261

5-16
SECTION 5
TEST RESULTS
MODE PATTERN CATEGORY RESULTS
MODE
CATG
PATT
SPX CURRENT
Simplex Current — The magnitude of the sim-
plex current flowing between the transmit output
tip and ring and the receive input tip and ring.
Simplex current is displayed as a number from
10 to 200 followed by the label mA for milliam-
peres. If the current is less than 10 mA, the value
<10 mA is displayed. If the current exceeds 200
mA, the value >200 mA is displayed.
TIMING SLIP
Timing Slips — The number of bit slips and
framing slips counted when the RX jack input
has slipped from the REF jack input. Timing
slips are displayed as the number of framing
slips and the number of bit slips. Each framing
slip equals 193 bit slips. The framing slip total is
displayed in the third line of the RESULTS
display in a range from -999 to +999. The bit slip
total is displayed in the bottom line of the
RESULTS display in a range from -192 to +192.
TRAFFIC A/B BITS
Traffic A/B Bits — The RESULTS display
shows the A and B signaling bits for all 24 DS0
channels (as shown).
T1 D4 TRAFFIC
A/B BITS
a 101010 101010
01-12 b 000000 000000
a 101010 101010
13-24 b 000000 000000