TTC T-BERD 107A, Reference Manual

Page: 199 / 261

6-16
SECTION 6
PRINTER
OPERATION
6.5.2 Controls Printout
The controls printout lists the current setting of
all front-panel switches and auxiliary functions. A
controls printout is initiated manually using the AUX
PRINT function. Figure 6-6 is an example of a
controls printout.
CONTROLS PRINT 12:55:34 JAN 05
MODE T1 D4 PATTERN ALL ONES
TIMED/CONT CONT TEST LEN N/A
PRI EVE OFF PRI TIME N/A
TIMING INTERNAL CODE AMI
LOOP CODE CSU ESF LOOP IN BAND
LINE/PAY N/A RCV INPUT BRIDGE
PARITY NONE BAUD RATE 2400
CR/CR-LF CR-LF LBO 0dB
CH DROP 16
Figure 6-6
Controls Printout
6.5.3 Messages
When the AUX PRI EVNT function is set to
ERROR, alarm and status messages are printed
automatically to inform the operator of an important
development related to the ongoing test. If the AUX
PRI EVNT function is set to OFF, alarm and status
messages are not printed automatically. All alarm
and status messages are time- and date-stamped for
easier mapping of problem sequences and trend
analysis.