TTC T-BERD 107A, Reference Manual

Page: 175 / 261

5-18
SECTION 5
TEST RESULTS
MODE PATTERN CATEGORY RESULTS
MODE
CATG
PATT
MODE PATTERN CATEGORY RESULTS
MODE
CATG
PATT
T1 D4 DATA BITS
CH ZZ
SIGNAL 10101010
VF RESULTS
VF RESULTS — The RESULTS display shows
the VF signal level (in dBm) and frequency (in
Hz) for the selected channel. The VF RESULTS
are displayed as shown, where ZZ is the number
of the selected drop channel, +/-##.# dBm is the
signal level with a range from +3.0 to -40.0 dBm,
and #### Hz is the frequency with a range from
60 to 3904 Hz. If the dropped channel is set to
NONE, the ZZ is replaced by two dashes
(——) and the VF RESULTS are both displayed
as NO CHANNEL. Pressing the
PATTERN switch
changes the selected channel that is displayed
and that is dropped to the speaker and VF OUT
jack.
T1 D4 VF RESULTS
CH ZZ
+/-##.# dBm
SIGNAL #### Hz