TTC T-BERD 107A Reference Manual Download Page 28

Page: 28 / 261

SECTION 2

2-13

INSTRUMENT CHECKOUT
AND MAINTENANCE

2.5.2 Installation Verification for Options

Advanced Stress Patterns Option (107A-2)

If the Advanced Stress Patterns Option is in-

stalled, perform the following procedure to verify its
operation.

Test setup

Prepare the T-BERD 107A for testing in
accordance with the Instrument Checkout
Basic Setup procedure.

PATTERN switch

Select the T1 DALY pattern.

Signal verification

Verify that the Pattern Sync LED illumi-
nates.

Repeat for other patterns

Repeat Steps 2 and 3 for the T1-2/96, T1-3/
54, T1-4/120, T1-5/53, 55 OCTET, and MIN/
MAX patterns.

POWER switch

Press to turn the T-BERD 107A off.

Summary of Contents for T-BERD 107A






































































































































































































































































Search results

Summary of Contents for T-BERD 107A

Reviews:

Brands by name

Popular brands

TTC T-BERD 107A, Reference Manual

Search results

Summary of Contents for T-BERD 107A

Reviews:

Brands by name

Popular brands