TTC T-BERD 107A, Reference Manual

Page: 37 / 261

SECTION 2
2-22
INSTRUMENT CHECKOUT
AND MAINTENANCE
2.8 WARRANTY
2.8.1 Warranty Policy
All equipment manufactured by TTC is war-
ranted against defects in material and workmanship.
This warranty applies only to the original purchaser
and is non-transferable unless express written autho-
rization of the warranty transfer is granted by TTC.
No other warranty is expressed or implied. TTC is
not liable for consequential damages.
Liability under this warranty extends only to the
replacement value of the equipment. The warranty is
void under the following conditions.
•
Equipment has been altered or repaired
without specific authorization from TTC.
•
Equipment is installed or operated other
than in accordance with instructions con-
tained in TTC literature and operating
manuals.
2.8.2 In-Warranty Service
Equipment in warranty must be returned to the
factory with shipping prepaid. The equipment should
be packed and shipped in accordance with instruc-
tions in Section 2.9 Equipment Return Instructions.
Before returning any equipment, the customer must
obtain a Return Authorization (RA) number by con-
tacting the TTC Repair Department. The RA number
should then appear on all paperwork and be clearly
marked on the outside of the shipping container.