TTC T-BERD 107A, Reference Manual

Page: 148 / 261

4-51
AUXILIARY
FUNCTIONS
SECTION
4
BAUD RATE
—
Press the RESULTS switch to
scroll through the baud rate selections of 300,
1200, 2400, 4800, and 9600.
PARITY
—
Press the RESULTS switch to scroll
through the parity selections of NONE, ODD,
and EVEN. When parity is set to NONE, the
data output is automatically set for eight data
bits. When parity is set to EVEN or ODD, the
data output is set for seven data bits and one
parity bit.
TERM 232
—
Press the RESULTS switch to
toggle the RS-232 line termination character
between CR (Carriage Return) and CRLF (Car-
riage Return-Linefeed).
Use the following procedure to set the RS-232
printer interface parameters.
1. AUX and PATTERN switch
Press the AUX switch to activate the auxiliary
functions. Press the PATTERN switch to
select the AUX PRNTPORT function.
2. CATEGORY switch
Press either arrow to scroll to the desired
parameter, BAUD RATE, PARITY, or
TERM 232.
3. RESULTS switch
Press either arrow to set the parameter to the
desired value.
4. Repeat to set other parameters
Repeat Steps 2 and 3 to set the remaining
parameters to the desired values.