TTC T-BERD 107A, Reference Manual

Page: 152 / 261

4-55
AUXILIARY
FUNCTIONS
SECTION
4
Use the following procedure to set the idle code.
1. AUX and PATTERN switch
Press the AUX switch to activate the auxiliary
functions. Press the PATTERN switch to
select the AUX FTI IDLE function.
2. CATEGORY switch
Press the up arrow to move from left to right.
Press the down arrow to move from right to
left. Pressing either arrow after it has reached
the end of its range wraps around to the other
end.
3. RESULTS switch
Pressing the up arrow sets the flashing bit to
a one and advances one bit to the right.
Pressing the down arrow sets the flashing bit
to a zero and moves the cursor one bit to the
right.
4. AUX switch
Press the AUX switch to return to the operat-
ing mode.
Consider the following functions and modes
when setting the FT1 idle channel code:
•
AUX FT1 CHAN function
•
AUX FT1 RATE function
•
AUX VF TONE function