Trilithic 720 DSP, Operation Manual

Page: 364 / 440

www.trilithic.com
Page IV-144
720 DSP Operation Manual
Business Services Meter
3. From the Test Point screen,
select Save As from the File
softkey as shown in the image
to the right.
4. Use the Virtual Keyboard
to enter the name of your
test point. Once you have
entered a name, select the
Done softkey as shown in the
image to the right.
5. In this example, the name
of the test point simply
corresponds to the customer
premise equipment (CPE).
6. The name of the test point will
be displayed in the header
bar as shown in the image to
the right.
7. Repeat the steps above to
create additional test points.
Once you have created all
of the required test points for
your system, proceed to the
next section.