manualshive.com logo in svg

Trilithic 720 DSP, Operation Manual

Share
Download
Trilithic 720 DSP Operation Manual Download Page 177

www.trilithic.com

Page II-99

720 DSP Operation Manual

Business Services Meter

4.  Select the 

Database

 softkey.

5.  From the 

Database

 pop-up menu, 

select the 

Backup

 button as shown in 

the image to the right.

7.  Press the 

Function

 button and select 

the 

Deactivate USB Power

 function 

as shown in the image to the right.

8. 

Remove the USB flash drive from the 

meter to clone.

9.  Login to an existing user or create a 

new user on the new meter to clone to.

10. 

Insert a USB flash drive into the USB 

port of the new meter to clone to.

6.  The 

Message Bar

 will indicate a 

successful backup to the flash drive by 

displaying the text  

“-> /media/sda1/main.db”

 as shown 

in the image to the right.

Summary of Contents for 720 DSP

























































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands