Trilithic 720 DSP Operation Manual Download Page 201

Page: 201 / 440

www.trilithic.com

Page III-3

720 DSP Operation Manual

Business Services Meter

www.trilithic.com

Introduction

Select the

Autotest

softkey to display

Autotest

menu as shown in the image to

the right. The 720 DSP enables you to view,

create, and edit jobs as well as execute

autotests on the meter.
This section will provide you with instructions

on how to utilize the functions available in the

Autotest

menu of the instrument including:

•  Synchronize with ViewPoint
•  Manage Jobs
•  Execute Autotests

Overview

Chapter 1

Autotests can only be created using the ViewPoint Express

PC Configuration Software or ViewPoint Integrated Server

Package with WFM Module.

The CalCheck and Home Cert Autotests are included by

default from the factory. When ViewPoint and the meter are

synchronized all of the Autotests in ViewPoint for this meter

will be displayed on this screen.

Summary of Contents for 720 DSP

























































































































































































































































































































































































































































Search results

Summary of Contents for 720 DSP

Reviews:

Brands by name

Popular brands

Trilithic 720 DSP, Operation Manual

Search results

Summary of Contents for 720 DSP

Reviews:

Brands by name

Popular brands