manualshive.com logo in svg

Trilithic 720 DSP, Operation Manual

Share
Download
Trilithic 720 DSP Operation Manual Download Page 217

www.trilithic.com

Page III-19

720 DSP Operation Manual

Business Services Meter

Location Pass/Fail Indicators

When an Autotest App is created in the ViewPoint WFM Module, channel plans and limit sets 

will be assigned to each location for testing. The following standard locations can be added to 

an Autotest App:

•  Tap
•  Drop
•  Ground Block
•  Outlet

Custom locations can also be created using the ViewPoint WFM Module. Any locations that 

aren’t allowed for the selected autotest will not be displayed and cannot be executed. 
A Pass/Fail status will be displayed below each test location. When any of the individual 

measurement parameters of an autotest location fail, the location as a whole will indicate a Fail 

status.
Each individual location will indicate its status using the following icons:

This icon indicates that this 

autotest has not been executed at 

this location.
This icon indicates that all of the 

measurements for this test location 

have passed the measurement 

thresholds.
This icon indicates that one or 

more of the measurements for 

this test location have failed the 

measurement thresholds.

Summary of Contents for 720 DSP

























































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands