manualshive.com logo in svg

Trilithic 720 DSP, Operation Manual

Share
Download
Trilithic 720 DSP Operation Manual Download Page 344

www.trilithic.com

Page IV-124

720 DSP Operation Manual

Business Services Meter

Marker Adjustment

The Upstream Linear Distortion measurement includes markers for each of the three types of 

displays. The markers can be adjusted as shown in the following sections:

Tap Markers

In the 

Equalizer Taps

 display, there are two on-screen markers that can be moved 

independently of one another and are used to highlight a specific equalizer tap.

The markers are represented by the 

following color bullets and equalizer tap:

•  Marker 1

 – Purple

•  Marker 2

 – Light Blue

Highlight the desired marker and use the 

up/down arrow buttons to change the 

marker to a different equalizer tap. The 

level and distance (time) to the selected 

equalizer tap are displayed as shown in 

the image to the right.

Spectrum Markers

In the 

In Channel Response

 and 

Group Delay

 displays that can be moved independently 

of one another and there are two 

on-screen markers that are used to highlight a specific 1 

MHz frequency range.
The markers are represented by the 

following color bullets and vertical line:

•  Marker 1

 – Purple

•  Marker 2

 – Light Blue

Highlight the desired marker and use 

the up/down arrow buttons to change 

the marker to a different frequency. The 

frequency and distance (time) to the 

markers are displayed as shown in the image to the right.

Summary of Contents for 720 DSP

























































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands