TRENDnet TPE-3012LS, User Manual, Page: 94 / 187

© Copyright 2020 TRENDnet. All Rights Reserved.
TRE
NDnet User’s Guid e
TPE-3012LS / TPE-3018LS
90
Multicast
The multicast section will allow you to configure IGMP and MLD snooping for multicast
traffic filtering on the switch.
Configure unknown multicast and multicast forwarding method
Multicast > General > Property
1. Log into your switch management page (see “ Access your switch management page ”
on page 11).
2. Click on Multicast , click on General , and click Property .
3. Review the settings. Click on Apply to save the configuration changes.
•
Unknown Multicast Action –
o
Flood: When the swich receives unknown multicast traffic, flood the
traffic out all switch ports.
o
Drop: When the switch receives uknown multicast traffic, drop the
traffic.
o
Forward to Router Port: When the switch receives uknown multicast
traffic, forward the traffic to the multicast router port.
o
Age-Out Timer – Enter the amount of time in seconds that you want
your switch to wait before it purges an inactive dynamic MAC address.
•
Multicast Forward Method – Select the method the switch should forward IPv4
multicast traffic.
o
DMAC-VID: Multicast frames are forwarded by destination MAC
address.
o
DIP-VID: Multicast frames are forwarded by destination IP address.
4. Click Save Settings to Flash (menu) .
5. Click Save Settings to Flash (button) , then click OK.
Note: This step saves all configuration changes to the NV-RAM to ensure that if the
switch is rebooted or power cycled, the configuration changes will still be applied.