TRENDnet TPE-3012LS, User Manual, Page: 86 / 187

© Copyright 2020 TRENDnet. All Rights Reserved.
TRE
NDnet User’s Guid e
TPE-3012LS / TPE-3018LS
82
Configure Spanning Tree Protocol MST Port settings (MSTP)
Spanning Tree > MST Port Setting
Note: The following configuration settings only apply to MSTP multiple spanning tree
protocol configuration. MSTP must be selected for the Operation Mode under Spanning
Tree > Property. In order to use MSTP, LLDP flooding cannot be used and must be
changed to Filtering or Bridge under Discovery > LLDP > Property under LLDP Handling.
1. Log into your switch management page (see “ Access your switch management page ”
on page 11).
2. Click on Spanning Tree , and click on MST Port Setting .
3. Select the ports in the list to modify the MST configuration and click Edit.
4. Review the settings below and click Apply to save the configuration.
•
Path Cost (0 = Auto) - This is the port cost used by MSTP when calculating path
cost to the root bridge.
•
Priority - This is the port priority used by MSTP in calculating path costs when
two ports on the switch have the same port cost.
•
Port Role – Displays the currently assigned port role for the MSTP
topology/configuration.
•
Mode – Displays the current spanning tree protocol mode.
•
Type – Displays the port type for the MSTP topology/configuration.
•
Designated Bridge – Displays the designated bridge ID.
•
Designated Port ID – Displays the designated port ID.
•
Designated Cost – Displays the designated cost.
•
Remaining Hop – Displays the current remaining hops of the MSTP
topology/configuration.
5. Click Apply .
6. In the top right, click Save to save the configuration settings to NV-RAM/startup
configuration.
7. Click OK .