TRENDnet TPE-3012LS, User Manual, Page: 167 / 187

© Copyright 2020 TRENDnet. All Rights Reserved.
TRE
NDnet User’s Guid e
TPE-3012LS / TPE-3018LS
163
Item Description
Address
Type Remote host address type for Hostname/IPv4/IPv6.
Server
Address
Remote host.
Engine ID
Specify Remote SNMP engine ID. The engine ID is range10 to
64 hexadecimal characters, and the hexadecimal number
must be divided by 2.
4. Click Apply .
5. In the top right, click Save to save the configuration settings to NV-RAM/startup
configuration.
6. Click OK .
Configure the SNMP Trap Management
Management > SNMP > Trap Management
A Host IP address is used to specify a management device that needs to receive SNMP
traps sent by the switch. This IP address is associated with the SNMP Version and a valid
Community Name in the Host table of the switch.
1. Log into your switch management page (see “ Access your switch management page ”
on page 11).
2. Click on Management, click on SNMP, and click on Trap Event .
3. Review the settings.
Item Description
Authentication
Failure
SNMP authentication failure trap, when community not
match or user authentication password not match.
Link Up/Down Port link up or down trap.
Cold Start Device reboot configure by user trap.
Warm Start Device reboot by power down trap.
4. Click Apply .
5. In the top right, click Save to save the configuration settings to NV-RAM/startup
configuration. Click OK .