© Copyright 2020 TRENDnet. All Rights Reserved.
TRE
NDnet User’s Guid
e
TPE-3012LS / TPE-3018LS
107
Configure RADIUS network port settings
Security > Authentication Manager > Port Settings
This section will allow you to configure RADIUS network port settings.
1. Log into your switch
management page (see “
Access your switch management page
on page 11).
2. Click on
Security,
click on
Authentication Manager,
and click on
Port Settings
.
3. Select the port you would like to configure and click
Edit.
Review the settings. Click
Apply
to save the settings.
•
Port:
Displays the selected port(s).
•
Port Control:
o
Disabled:
Disable authentication and allows clients network access.
o
Force Authorized:
Port forces authorization and allows client network
access.
o
Force Unauthorized:
Port prevents authorization and denies client
network access.
o
Auto:
Authentication is required for clients to allow network access.
•
Reauthentication:
Check
Enabled
to allow clients to attempt re-authentication
automatically after the reauthentication period has expired.
•
Max Hosts:
Specify the max. number of hosts allowed. (Applies to multiple
authentication mode only)
Common Timer
•
Reauthentication:
Set the reauthentication interval in seconds to in which a
client will automatically attempt reauthentication.
•
Inactive:
Set the idle timeout period in seconds to automatically de-
authenticate a client if no traffic is received and the client is idle.
•
Quiet:
When a port is in locked state after authentication fails several times,
the host will be locked in quiet period. Only after the quiet period has expired,
the client will be able to reauthenticate.
802.1x Parameters
•
TX Period:
Set the time period in seconds that the device will wait for a
response to an EAP (Extensible Authentication Protocol) request/identity frame
from the supplicant (client) before resending the request.
•
Supplicant Timeout:
Set the time period allowed to receive a response from
the supplicant (client) in the authentication process.
•
Server Timeout:
Set the time period allowed before EAP requests are resent to
the supplicant (client).
•
Max Requests:
Set maximum allowed number of EAP requests sent.
Summary of Contents for TPE-3012LS
Page 1: ...TRENDnet User s Guide Cover Page...
Page 187: ......