TRENDnet TPE-3012LS, User Manual, Page: 163 / 187

© Copyright 2020 TRENDnet. All Rights Reserved.
TRE
NDnet User’s Guid e
TPE-3012LS / TPE-3018LS
159
4. Click Apply .
5. In the top right, click Save to save the configuration settings to NV-RAM/startup
configuration.
6. Click OK .
Configure the SNMP Community Table
Management > SNMP > Community
A community string has attributes for controlling who can use the string and what the
string will allow a network management station to do on the switch. You must first
define an SNMP User and Group Name on the SNMP User/Group pages and then define
a Community Name on the SNMP Community Table page.
1. Log into your switch management page (see “ Access your switch management page ”
on page 11).
2. Click on Management, click on SNMP, and click on Community .
3. Click Add to a new SNMP community table. Review the settings.
Item Description
Community The SNMP community name. Its maximum length is 20
characters.
Type
SNMP Community mode
•
Basic: SNMP community specifies view and access right.
•
Advanced: SNMP community specifies group.
View
Specify the SNMP view to define the object available to the
community.
Access
SNMP access mode
•
Read-Only: Read only.
•
Read-Write: Read and write.
Group
Specify the SNMP group configured by the command snmp
group to define the object available to the community.