TRENDnet TPE-3012LS, User Manual, Page: 170 / 187

© Copyright 2020 TRENDnet. All Rights Reserved.
TRE
NDnet User’s Guid e
TPE-3012LS / TPE-3018LS
166
Drop Events Number of packets that were dropped.
Packets
R
eceived
Number of packets received, including bad packets,
Multicast packets, and Broadcast packets.
Broadcast
Packets Number of good Broadcast packets received. This number
does not include Multicast packets.
Multicast
Packets
Number of good Multicast packets received.
CRC &Align
Errors Number of CRC and Align errors that have occurred.
Undersize
Packets
Number of undersized packets (less than 64 octets)
received.
Oversize
Packets
Number of oversized packets (over 1518 octets) received.
Fragments Number of fragments (packets with less than 64 octets,
excluding framing bits, but including FCS octets) received.
Jabbers
Number of received packets that were longer than 1632
octets. This number excludes frame bits, but includes FCS
octets that had either a bad FCS (Frame Check Sequence)
with an integral number of octets (FCS Error) or a bad FCS
with a non-integral octet (Alignment Error) number. A Jabber
packet is defined as an Ethernet frame that satisfies the
following criteria:
●
Packet data length is greater than MRU.
●
Packet has an invalid CRC.
●
RX error event has not been detected.
Colisions
Number of collisions received. If Jumbo Frames are enabled,
the threshold of Jabber Frames is raised to the maximum size
of Jumbo Frames.
Frames of
64 Bytes Number of frames, containing 64 bytes that were received.
Frames of
65 to 127
Bytes Number of frames, containing 65 to 127 bytes that were
received.
Frames of
128 to 225
Bytes Number of frames, containing 128 to 255 bytes that were
received.
Frames of
256 to 511
Bytes Number of frames, containing 256 to 511 bytes that were
received.
Frames of
512 to
1023 Bytes Number of frames, containing 512 to 1023 bytes that were
received.
Frames
Greater
than 1024
Bytes Number of frames, containing 1024 to 1518 bytes that were
received.
Clear Clear the statistics for the selected ports.
View View the statistics on the specified port.